Woodworking Plans

πŸ”₯+ Woodworking Plans 28 May 2020 These free workbench plans will help you build the workbench you've ... Use these free workbench plans to build yourself a workbench in your garage or ... Carry out this workbench plan and you'll get a simple but sturdy table ...

Woodworking Plans Organization & Storage/ Carpentry/ Finishing & Refinishing/ Jigs & Fixtures/. Wine Rack - How to Make A Rack for Your Vintage – Wines and More. Popular.

Custom Insulated Dog House Skip to main content
Ana White
Woodworking Planshow to Woodworking Plans for Trimmed and ready for Christmas - Dollhouse
Woodworking Planshow to Woodworking Plans for Black Farm House Bed
Woodworking Planshow to Woodworking Plans for Tractor Seat stool
Submitted by Ana White on Woodworking Planshow to Woodworking Plans for Tue, 09/17/2019 - 10:54
Difficulty
Intermediate
|

Free step by step plans to build a Land of Nod inspired toybox with hinged lid from Ana-White.com

Dimensions
Dimensions shown above

Preparation

Shopping List
  • 1 - 4x4 foot sheet of 1/2” thick hardwood plywood
  • 1 - 3/4” thick project panel 36” x 16”
  • 2 - 1x3 @ 8 feet long
  • 1 - 1x2 @ 8 feet long (need 1 more for optional top)
  • 1 - 2x2 @ 8 feet long
  • 1” and 1 1/4” pocket hole screws
  • Hinges and felt pads, possibly a hinge support to keep the lid from slamming shut or falling backwards
Common Materials
paint brush
Cut List
  • 2 - 1/2” plywood 12” x 12”
  • 2 - 1x3 @ 12”
  • 2 - 1x2 @ 12”
  • 2 - 1/2” plywood @ 12” x 32”
  • 2 - 1x3 @ 32”
  • 2 - 1x2 @ 32”
  • 4 - 2x2 @ 18 1/2”
  • 3 - 1x3 @ 13”
  • 1/2” plywood 33” x 13”
  • 1 - 3/4” thick project panel 36” x 16”

Β 

Optional top

  • 1 - 1x2 @ 33 1/2”
  • 2 - 1x2 @ 14”
Tools
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Woodworking Planshow to Woodworking Plans for Step 1

TIP: Drill all 1/2” pocket holes first (basically, just drill 1/2” pocket holes around all sides of 1/2” plywood pieces) and then drill the 3/4” pocket holes so you don’t have to reset your jig multiple times.

I designed this toy box a little different - more like how I build doors - to conserve space inside, and keep it light, and also because 1/2"". This means you''s to more building!

gsumarcinko

Wed, 11/13/2013 - 10:30

2x2 lumber for this project

Woodworking Planshow to Woodworking Plans for To Jaime or anyone else following these comments, where are you finding straight 2x2 lumber? If I can''t wait to build it.

for 1 last update 2020/05/28 -Jeff-Jeff

Back