Woodworking Plans

ūüĒ•+ Woodworking Plans 29 May 2020 With the same skills it takes to build a butcher block or cutting board, you can build this eye-catching end grain coffee table. Link Type: free plans

Woodworking Plans Spacious floor plan set on your own stocked pond. Cabin has 2 Queen beds; Air-conditioned comfort ‚Äď fully equipped. Flatscreen television with ...

High Chair Rocker Desk Plans Lowes
         
Ovidiu 5 YOUR FAVORITES RANDOM PLAN

Woodworking Planshow to Woodworking Plans for This step by step diy project is about 20×20 wood shed¬†plans. I have designed this large storage shed with a gable roof so you can create more space for your tools and outdoor furniture. This shed features large 8′ double doors, a side door and a side window. Make sure you read the local building codes before starting the project.¬†Take a look over the rest of my¬†woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

 

 

Projects made from these plans

 

 

20×20 Shed Plans

Woodworking Planshow to Woodworking Plans for Building a 20×20 shed with a gable roof

 

  • A¬†– 5¬†pieces of 6×6 lumber¬†– 240″ long¬†SKIDS
  • B¬†– 2 pieces of 2×6 lumber – 240″ long, 11¬†pieces – 237″ long¬†FLOOR FRAME
  • C¬†– 10 pieces of 3/4″ plywood¬†– 48″x96″ long, 5 pieces – 48″x48″ long¬†FLOOR
  • D¬†– 2 pieces of 2×4 lumber – 240″ long, 1 piece – 233″ long, ¬†13¬†pieces – 91 1/2″ long¬†SIDE¬†WALL
  • E¬†– 1¬†piece of 2×4 lumber – 240″ long, 1 piece – 233″ long, 1 piece – 54″ long, 1 piece – 150″ long, 16¬†pieces – 91 1/2″ long, 2 pieces – 78 1/2″ long, 6 pieces – 7 1/2″ long, 2 pieces – 36″ long, 3 pieces – 37″ long, 6 pieces of 2×6 lumber – 39″ long¬†SIDE¬†WALL
  • F¬†– 2¬†pieces of 2×4 lumber – 68 1/2″ long, 1 piece – 233″ long, 1¬†piece – 240″ long, 8¬†pieces – 91 1/2″ long, 2 pieces – 89″ long, 2 pieces of 2×6 lumber – 99″ long¬†Woodworking Planshow to Woodworking Plans for FRONT¬†WALL
  • G¬†– 2¬†pieces of 2×4 lumber – 233″ long, 1¬†piece – 240″ long, 11¬†pieces – 91 1/2″ long¬†Woodworking Planshow to Woodworking Plans for BACK¬†WALL
  • H¬†– 19¬†pieces of T1-11 siding – 48″x96″ long, 1 piece – 8 1/2″x48″ long¬†SIDING

 One week

 

 

Make sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. 

Woodworking Planshow to Woodworking Plans for for 1 last update 2020/05/29   

 

How to build a 20×20 shed

Building the floor frame

The first step of the project is to frame the floor for the 20×20 storage shed. Therefore, use 2×6 or 2×8 lumber for the joists and cut them at the dimensions shown in the diagram. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. Place the joists every 24″ on center. Alternatively, you can fit the joists every 16″ on center, as well. Align the edges flush and make sure the corners are square.

Fitting the the 1 last update 2020/05/29 skidsFitting the skids

Select the location for the shed to suit your needs and making sure it complies with the local building codes. Level the surface with attention and then compact a thick layer of gravel. Fit the 6×6 skids and then attach the floor frame. Align the edges flush and use rafter ties to lock them together tightly.

If the local codes don’t allow you to use 6×6 skids, you might have to pour footings.

Floor sheets

The next step of the project is to lay the 3/4″ plywood sheets to the floor of the shed. Align the edges flush and leave no gaps between the sheets for a professional result. Insert 1 5/8″ screws, every 8″ along the joists, for a professional result. Follow the pattern shown in the diagram for a neat result.

Building the front wall frame

Build the front wall from for the 20×20 gable shed from 2×4 lumber. Cut the plates and the studs from 2×4 lumber at the proper sizes, as shown in the diagram. Use 2×6 lumber and 1/2″ plywood for the double header (sandwich the plywood between the beams with 2 1/2″ screws inserted through both sides). Fit the header to the wall frame and lock it into place with nails.

Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center for a professional result. Align the edges flush and make sure the corners are square. You can adjust the size of the door opening to suit your needs.

Back wall frame

Next, frame the back wall for the 20×20 shed. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center and make sure the edges are flush.

Building the side wall with window

Building the side wall with window is the next step of the project. As you can see in the plans, you need to frame a 3′ side door and a 3’x3′ window, so you let the light inside the shed. You can adjust the size of the door or the size of the window so it suit your needs, especially if you already have purchased the items.

You need to double the posts that are placed at both ends of the wall. Fit 1/2″ plywood sheets between double studs so you enhance the rigidity of the frame. Use 2×6 lumber and 1/2″ plywood for the headers.

Side plain wall frame

Last but not least, you need to frame the opposite side wall. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and that the edges are flush.

Assembling the shed frame

Fit the four wall frames to the floor of the shed. Align the edges flush and plumb them with a spirit level. Drill pilot holes though the 1 last update 2020/05/29 the bottom plates and insert 3 1/2″ screws to lock the walls into place tightly. Moreover, you have to lock the adjacent walls together tightly with 3 1/2″ screws. Make sure the edges are flush and the corners are square.Fit the four wall frames to the floor of the shed. Align the edges flush and plumb them with a spirit level. Drill pilot holes though the bottom plates and insert 3 1/2″ screws to lock the walls into place tightly. Moreover, you have to lock the adjacent walls together tightly with 3 1/2″ screws. Make sure the edges are flush and the corners are square.

Side and back wall – siding

Fit T1-11 siding to the back wall and to the plain side wall of the 20×20 shed. Align the 1 last update 2020/05/29 the edges with attention and leave no gaps between the sheets. Use 6-8d nails to secure the sheets into place tightly, every 8″ along the framing.Fit T1-11 siding to the back wall and to the plain side wall of the 20×20 shed. Align the edges with attention and leave no gaps between the sheets. Use 6-8d nails to secure the sheets into place tightly, every 8″ along the framing.

Front wall – Siding

Fit the T1-11 siding sheets to the front of the 20×20 shed as well. Make the cuts to the panels that go around the door opening, so you can fit them into place tightly.

Woodworking Planshow to Woodworking Plans for Side wall with window – Siding

Woodworking Planshow to Woodworking Plans for Fit the siding sheets to the other side wall, as well. As you can see in the plans, you need to make cuts so you can fit the panels around the door and the door opening.

20×20 Shed Plans

Make sure you take a look over PART 2 of the project so you learn how to build the gable roof and PART for 1 last update 2020/05/29 3 to learn how to build the doors and how to attach the trims.Make sure you take a look over PART 2 of the project so you learn how to build the gable roof and PART 3 to learn how to build the doors and how to attach the trims.

20×20 Shed Plans – Side view with windows

This 20×20 shed is large enough to store a lot of items, while it is still easy enough to build in a do-it-yourself style. However, I recommend you to check out the local codes before starting the project so you learn how to get the job done legally.

the 1 last update 2020/05/29   

Woodworking Planshow to Woodworking Plans for  

This woodworking project was about 20×20 wood shed¬†plans.¬†If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Woodworking Planshow to Woodworking Plans for  






POSTED IN » 20x20, Gable, Shed
  • 24x24 Shed Plans
  • 12x24 Shed Plans
  • 10x14 Shed Plans






  • ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬†¬†¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬†¬†¬† ¬†¬†¬† ¬† ¬† ¬† ¬† ¬† ¬†

                                                  




    Woodworking Planshow to Woodworking Plans for 5 Comments »

    1. Carl at - Reply

      Very good detailed plans. Material list is a plus.

      • Ovidiu at - Reply

        Thank you for the the 1 last update 2020/05/29 kind words.Thank you for the kind words.

    2. Sean Flanagan at - Reply

      Would there be a reasonable way to add more windows and a second set of double doors to this plan?

    3. Jill nowers at - Reply

      Need 20 x 20. Building
      Have cement laid and ready
      Can you help me

    4. If I want to put this on 6X6 posts, do I make sure there is one every 4 feet like with the walls?




    Click here to cancel reply.















    *MyOutdoorPlans is participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Read More >>

    Copyright © 2012 - 2020 MyOutdoorPlans.com | All rights reserved