Woodworking Plans Old Hickory Buildings and Sheds is a company that sells storage sheds, cabanas, and animal shelters at over 800 locations in North America.Pole Barn House Blueprints
This step by step woodworking project is about cornhole game plans free. This article features detailed instructions for building a simple wood cornhole gameboard. We have designed the plans to keep the expenditures under control and to involve the least amount of work possible. These are the easiest plans for building a cornhole gameboard you will find on internet.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the wooden cabinet won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.
Woodworking Planshow to Woodworking Plans for
Building a cornhole game
One day One day
Woodworking Planshow to Woodworking Plans for Building the frame of the cornhole
The first step of the woodworking project is to assemble the frame of the cornhole game. In order to get a professional result, we recommend you to drill pocket holes at both ends of the short components and to insert 2 1/2 screws into the perpendicular slats. Add glue to the joints and make sure the corners are square.
Attaching the top
Build the top of the cornhole game out of 3/4″ plywood. Cut out a 6″ hole into the sheet and smooth the edges with fine-grit sandpaper. Use brad nails and waterproof glue to secure the component to the frame.
Woodworking Planshow to Woodworking Plans for Building the legs
Use 2×4 lumber to build the two legs for the cornhole board. Round the top of the legs with a jigsaw and drill a pilot hole for a 3 1/2″ carriage bolt. Cut the bottom at 75 degrees (make 15 degree cuts).
Assembling the legs
Drill pocket holes at both ends of the horizontal support and secure it to the legs using 2 1/2″ screws. Make sure the corners are right-angled and add glue to the joints.
Assembling the cornhole game
Fit the legs to the game board and insert 3 1/2″ carriage bolts. Add washers on both sides of the bolts and tighten the nuts. Make for 1 last update 2020/05/28 sure the legs flips easily.Fit the legs to the game board and insert 3 1/2″ carriage bolts. Add washers on both sides of the bolts and tighten the nuts. Make sure the legs flips easily.
Cornhole game plans
One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.
Top Tip: If you want to enhance the look of the project and to protect the wooden cornhole game from decay, we recommend you to cover the components with paint or stain.
This woodworking project was about cornhole gameboard plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.
Are the legs to this game cut in a angle. It does not mention it but the diagram makes it look like it needs an angle
You need to make 15 degree cuts.
I am looking for the plans to your cornhole game Scoreboard, thanks
No plans for the scoreboard. That was made by a reader using for 1 last update 2020/05/28 his own design.No plans for the scoreboard. That was made by a reader using his own design.
Woodworking Planshow to Woodworking Plans for Click here to cancel reply.