On Monday I shared the window box Brad and I recently built to add curb appeal to our house. Today I’m sharing how to make a window box so you can hopefully build one (or more) for your home.
Before I get into the tutorial, I have an exciting announcement. I’m super pumped to be joining the Lowe’s Creative Ideas creator and influencers network! This means I’ll participate in monthly DIY challenges and post them here on the blog. I’m really excited about this opportunity to work with a great company and other talented DIY bloggers!
Woodworking Planshow to Woodworking Plans for Alright, let’s get started with the supplies you’ll need. Now, your supplies may very slightly from mine, especially if you won’t be securing your window box(es) to a brick facade. Below are the supplies we used to complete this project.
Woodworking Planshow to Woodworking Plans for Supplies:
wood– 3 long pieces, 2 square pieces (see below for the exact measurements of ours)
masonry drill bit
stainless steel nuts
stainless steel bolts
stainless steel washers
Since our front window is roughly 86 inches wide, we decided to make things easy and go with an 80 inch wide window box.
So we headed to Lowe’s to pick out the wood and have it cut to size. We had the wood cut into three pieces (80 in. x 7 1/4 in. x 3/4 inch). For the two ends we had them cut pieces that were 7 1/4 in. by 7 1/4 in. by 3/4 in.
We used wood clamps to position the pieces on our saw horses.
Then we grabbed the nail gun and got to work. Putting a nail in about every 8-10 inches.
Once we were done nailing the two sides we moved onto the ends. We repositioned the wood clamps to secure the end pieces.
(Brad purposely wore this shirt for this project. He wanted to make sure everyone saw him.)
Jack was present to supervise this project. He also thought it was funny to wrap his leash around my feet while I took photos.
After using the nail gun on the sides, we flipped the window box over.
Then we put nails in the bottom of the ends.
Woodworking Planshow to Woodworking Plans for After the nailing part was over, I filled the nail holes with nail filler, followed with light sanding for 1 last update 2020/06/01 to smooth things out.After the nailing part was over, I filled the nail holes with nail filler, followed with light sanding to smooth things out.
Next came the caulking. Since this window box is going to be outside in the rain, and essentially collecting rain, we wanted to make the inside of the box as airtight as possible so water wouldn’t settle in the cracks and rot the wood faster.
We caulked all of the corners inside the window box, and let it dry overnight.
Then came the drainage holes.
Woodworking Planshow to Woodworking Plans for We put in 8 drainage holes. You can see 6 of the holes in the photo below.
Woodworking Planshow to Woodworking Plans for
Then it was time to prime and paint.
I put on two coats of primer and two coats of outdoor paint. Since we were going with plain white, I grabbed a quart of ultra white satin outdoor paint at Lowe’s, had the paint people shake it up, and went on my way.
We used three L brackets to secure the window box to the house. We measured everything out and marked it accordingly. To make sure the brackets were level, we used a level.
Then Brad broke out the hammer drill and masonry bit to drill into the brick.
We used masonry screws to secure the L brackets to the house.
Here’s how the brackets looked when we were done.
We brought out the window box just to make sure everything was level.
Since we were making the window box a removable unit, we used stainless steel nuts, bolts, and washers.
To figure out where we needed to drill the holes for the bolts, we positioned the window box on the L brackets, located the holes in the L brackets that touched the bottom of the window box, and used a Sharpie to mark where the holes were on the window box.
Then Brad drilled the holes where we made the marks.
On the inside of the box he counter sank so the bolts would sit flush.
We put the window box back on the L brackets and secured it with the bolts going through the top of the window box, and the washers and nuts on the under side of the window box. So when we want to remove the window box and store it for winter, we just have to remove the nuts, washers, and bolts.
We decided to use three plastic planters inside the window box to make clean up easier. I have to admit that we didn’t account for lip on the planters so we had to saw off the lips of the planters in order to get them to fit inside the window box. Also, the planters we bought didn’t have drainage holes so we had to drill holes into the bottoms, but that wasn’t very hard. So keep all of this in mind if you intend to use planters inside your window box.
We love how the window box turned out, and how it adds instant curb appeal to our house.
I can’t wait for the flowers to fill in and begin to spill out of the window box.
You can find more DIY ideas from the other amazing Lowe’s Creators & Influencers!
As a Lowe’s Creative Ideas Creator, I was provided a gift card to cover the cost of materials for my project. All opinions are 100% my own.