Woodworking Plans

đŸ”„+ Woodworking Plans 29 May 2020 Photo enthusiasts have uploaded gardening clipart wooden wheelbarrow for free download here! ... Rusty old transparent png stickpng. Gardening clipart ...

Woodworking Plans Carved into a single piece of wood is a Red Winged Blackbird, Cattails, ... Photo Updates on my latest ...

Diy Instagram Photo Wall

One great DIY project that is sure to bring attention to the 1 last update 2020/05/29 your outdoor area is a pair of Adirondack chairs. One of the main features that make an Adirondack chair look stylish is the slanted bottom and back.One great DIY project that is sure to bring attention to your outdoor area is a pair of Adirondack chairs. One of the main features that make an Adirondack chair look stylish is the slanted bottom and back.

The Adirondack rocking chair plans shown here are broken down into simple to follow steps. The plans include illustrations, patterns, shopping list, cutting list, and assembly instructions.

Predrill all holes. Use a belt sander to smooth out irregularities. Countersink screws, add wood putty, and sand.

Adirondack Rocking Chair – Overview

Adirondack Rocking Chair Plans – Material List

Woodworking Planshow to Woodworking Plans for Shopping List

Shopping List

2 – 2×6 – 8′

5 – 1×4 – 8′

1 – 2×4 – 8′

1 – 1×6 – 8′

deck screws

Woodworking Planshow to Woodworking Plans for 10 – carriage bolts, nuts, washers

Cutting List

Cutting List

(A) 2 – 2×6 – 3′ 2″

(B) 7 – 1×4 – 2′

(C) 1 – 1×4 – 2′

(D) 2 – 2×4 – 2′ 1 1/8″

(E) 2 – 1×4 – 2′ 7″

for 1 last update 2020/05/29 (F) 2 – 2×6 – 3′ 3″(F) 2 – 2×6 – 3′ 3″

(G) 1 -1×4 – 1′ 9″

(H) 2 – 1×6 – 2′ 10″

Woodworking Planshow to Woodworking Plans for (I) 1 – 1×4 – 3′ 3″

(I) 2 – 1×4 – 3′ 2″

(I) 2 – 1×4 – 3′ 1″

(J) 2 – 2×6 – 8″

Adirondack Rocking Chair Assembly Instructions

 

Woodworking Planshow to Woodworking Plans for  

Each square = 1″

Seat support (A) pattern. Start by cutting out the seat support using a 2×6. Cut two pieces of 2×6’s to 3′ 2″. Draw the pattern as shown in illustration above. Once you cut out the first one you can trace the pattern to the second seat support.

 

Woodworking Planshow to Woodworking Plans for  

Cut seat slats (B) out of 1×4 boards. Cut seven 1×4’s to 2′ for the seat slats and one 1×4 to 2′ for the bottom back support rail (C). Cut out the bottom back support (B) as shown in illustration below. Predrill all holes and screw deck screws through the slats and into the seat support.

Each square = 1″

1×4 bottom back support pattern (C).

Woodworking Planshow to Woodworking Plans for  

 

 

Install the front and rear legs. Cut two 2×4’s to 2′ 1 1/8″ for the front legs (D). Cut two 1×4’s to 2′ 7″ for the rear legs (E), cut the top as shown in illustration below.

Predrill holes and install using carriage bolts, washers, and nuts. See illustration above for assembly details.

 

Cut the top of the 1×4 rear legs (E) as show in illustration above.

 

Woodworking Planshow to Woodworking Plans for  

Each square = 1″

Rocker (F) pattern. Cut two 2×6’s to 3′ 3″ for the rockers (F). Cut as shown in pattern above. Once you cut out the first one you can trace the pattern to the second rocker.

 

for 1 last update 2020/05/29   

Install rockers (F) as shown in illustration above using carriage bolts, nuts, and washers.Install rockers (F) as shown in illustration above using carriage bolts, nuts, and washers.

 

Woodworking Planshow to Woodworking Plans for Each square = 1″

Top back support rail (G) pattern. Cut a 1×4 to 1′ 9″ for the top back support rail (G) cut as shown in illustration above.

 

Each square = 1″

Arm (H) pattern. Cut two 1×6’s to 2′ 10″ for the arms (H) cut as shown in illustration above.

 

 

 

Install the arms (H) and top back support rail (G)  using deck screws. Predrill all holes. Screw deck screws through the arm and into the front legs. Screw deck screws through the rear legs and into the arms. Screw deck screws through the top back support rail and into the rear legs.

 

Back slats (I). Cut one 1×4 to 3′ 3″, two 1×4’s to 3′ 2″, and two 1×4’s to 3′ 1″. Once the 1×4’s have been cut to size, cut from the bottom to the top as shown in illustration above. Optional you can round the corners as shown in overview illustration.

 

Woodworking Planshow to Woodworking Plans for

Each for 1 last update 2020/05/29 square = 1″Each square = 1″

Arm brace (J) pattern. Cut two pieces of 2×6’s to 8″ Next cut as shown for 1 last update 2020/05/29 on pattern above.Arm brace (J) pattern. Cut two pieces of 2×6’s to 8″ Next cut as shown on pattern above.

 

Install back slats (I) and arm brace (J) using deck screws. Predrill all holes. Screw deck screws through the back slats and into the back support rail. Screw deck screws through the arm brace and into the front legs.

Like these Adirondack rocking chair plans? Let me know, leave me a comment below. Share this link with your friends and your social media, thanks.

 

Construct101 offers free online version plans. These free plans also have a free print friendly PDF downloadable version free of ads. Click here to download.

Woodworking Planshow to Woodworking Plans for Save

Woodworking Planshow to Woodworking Plans for Share

Related Articles

4 comments

  1. would like to have a set that I can download and save, and print to take to my shop.`

  2. I like all of them can’t wait to get started

  3. Love your plans however I would like an easily readable PDF version of this and other plans please.

Leave a Reply Cancel reply

Woodworking Planshow to Woodworking Plans for Your email address will not be published. Required fields are marked *

Copyright 2020 www.Construct101.com