Wood filler, the beginner’s friend.
Woodworking Planshow to Woodworking Plans for Wood filler is often used to repair or restore damaged wooden articles by masking any cracks or indentations in the wood. The process involves filling the crack and after allowing the filler to cure, sanding it to a smooth, level finish. While this being the more common use for “wood makeup”, I find it to also be a great beginners woodworking tool.
As beginners, you often find yourself faced with a small blemish with the potential to remove from the professional look you might be aiming to achieve with your latest fine woodworking project. In these scenarios, a little wood filler can go a long way.
A commercial wood filler is inexpensive and comes in a range of tones to match whatever wood you may be working with but a perfect match will always be a challenge.
It is for this reason that I almost always chose to make my own. When making your own wood filler you can much closer match the color of the wood you’re working on.
How to make your own wood filler?
Well, it’s as easy the 1 last update 2020/08/04 as mixing wood glue and fine sawdust.
While the recipe to make your own wood filler with sawdust is not at all a complicated one there are some small considerations.Well, it’s as easy as mixing wood glue and fine sawdust.
While the recipe to make your own wood filler with sawdust is not at all a complicated one there are some small considerations.
- The glue to sawdust ratio?
Keeping in mind that the saw dust it what gives the color to your DIY filler while the glue will be the bonding agent, finding the right ratio of glue to sawdust will produce a putty-like compound.
- How fine is fine sawdust?
The finer the better. The sawdusts function is mostly to act as a pigment and therefore should be very fine. This dust is ideally harvested when sanding the workpiece.
Using a coarser sawdust will produce an undesirable texture.
- The color of the sawdust?
This is where the true beauty of mixing your own wood filler comes in. Harvesting the sawdust from the workpiece the wood filler will be used on allows you to exactly match the color and so making the area where the wood filler is used as inconspicuous as possible.
Mixing and applying
- Collect fines in a container
Collecting the sawdust should be done from the workpiece it will be used on as to match the color. In addition, it should be as fine as possible. Ideally harvested after sanding an area of the workpiece.
- Mix in wood glue
Gradually add glue to the sawdust while mixing until a putty-like consistency is achieved.
- Apply to hole or crack
Using a scraper, apply the DIY filler to the area it is to be used. In the case of deeper cracks and holes, try to get the wood filler as deep into the crack as possible. With the scraper, remove any excess filler from around the area and leave to cure.
- Sand it down
After the glue has cured use a fine grit (200+) sandpaper to sand the area to a smooth finish.
Making your own wood filler will save you from wandering around your local hardware store like a lost soul looking for the right filler to match your project and in addition spare you from the feeling of disappointment after arriving home just to find you made the wrong selection.
It also means you don’t have to dedicate a special area on your shelf for the range of different tones of wood fillers for all the woods you may be working with.
Woodworkjunkie.com, DIY like a pro